Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

Products » Pressure Sources
TW-600T Deadweight Pressure Tester
Model：TW-600T
Description
1.USAGE
This Deadweight Pressure Tester is used for the magnitude transmitting and high-accuracy measurement.
2.FEATURES OF STRUCTURE
1．Features:
a.Because of the tungsten carbide material of the whole piston system, the deformation error and additional temperature error are both extremely small. It can keep the right size of the piston system in long term.
b.It is quite easy for data read because of the indicator available for displaying the piston work position.
c.Work medium: If the pressure of the Tester is more than 30MPa: the medium is diisooctyl sebacate and the CSt(when 20℃) is 20~25mm2/s, which is much smaller than the medium- ricinus oil for the common pressure tester ( its CSt is: 900-1100 mm2/s). Thus, the sensitivity improved and also the measurement range increased a lot.  The bedplate is made of aluminium alloy, which is not only light but also sturdy and nice. The material of the pipe is 1Cr18Ni9Ti stainless steel.
3.MAIN TECHNICAL PARAMETERS
1.The Measurement Inaccuracy:  In the environment of 20±2℃ ( The temperature fluctuation is less than 0.5℃), please see the measurement inaccuracy as shown in the table below:
Accuracy Maximum permissible error
0.02 ±0.02% lower limit of the measurement range (when the pressure is below the lower limit of the measurement range)   ±0.02% actual measurement range (when the pressure is within the measurement range)

Model Measurement Range(MPa) λ
TW-1000T 2~100 7.19×10-7 MPa-1
TW-1600T 2~160 7.19×10-7 MPa-1
TW-6T, TW-60T, TW-250T, TW-600T 


Model Unit TV-600T
Measurement Range 1~60
Upper limit of the standard MPa 60
Upper limitof the standard MPa 1
Upper limit of the standard MPa 60
Upper limit MPa 1
Nominal area of piston cm2 0.1
Bedplate & piston Nominal mass Kg 1
Pressure MPa 1
Specific weight Nominal mass Kg 1; 2; 5
Pressure MPa 1; 2; 5
Quantity unit 2; 1; 11
Joint M20×1.5 M20×1.5
Weight Kg 90
Work medium Diisooctyul sebacate，when 20℃, the CSt is 20~25mm2/s, Acid value:≤0.05KOHmg/g.


 
saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: