1 product
The high performance draft range differential pressure transmitter EJX120A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX120A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure.
Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications. Other key features include quick response, remote set-up using communications, diagnostics and optional status output for pressure high/low alarm. The multi-sensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus protocol type is also available. All EJX series models in their standard configuration, with the exception of the Fieldbus type, are certified by TÜV as complying with SIL 2 for safety requirement.
2 specification
EJX120ADifferential Pressure Transmitter | ||
E capsule | ||
Measuring range | -1~1kPa(-4~4inH2O) | |
Measuring span | 0.025~1kPa(0.1~4inH2O) | |
Accuracy | ±0.09% | |
Protection grade | IP67,NEMA 4X和JIS C0920 immersion type | |
Explosion-proof specifications | FM,CENELEC ATEX,CSA,IECEx | |
output signal | 4~20mA DC,FOUNDATION™ Field bus, two wire system of digital communication | |
Power |
BRAIN, HART: 10.5~42V DC (EExi: 10.5~30V DC) Fieldbus: 9~32V DC (EExi Entity,9~24V DC,EExi FISCO, 9~17.5V DC) |
|
environment temperature | -25~80℃(-13~176℉) (ordinary) | |
process temperature | -25~80℃(-13~176℉) (ordinary) | |
The maximum working pressure | 50kPa(7.25psi) | |
Installation | 2-inch Pipe installation | |
Wetted material | Capsule | 316L SST(Iris: hartz alloyC-276) |
hamber flange | ASTM CF-8M | |
The shell | Aluminum alloy orASTM CF-8MStainless steel (optional) |