EJA510A and EJA530A Absolute and Gauge Pressure Transmitters

Flowmeter

Pressure Transmitter

Level Measurement

Control Valve Accessories

Products » Pressure Transmitter » EJA Pressure transmitter

EJA510A and EJA530A Absolute and Gauge Pressure Transmitters

　　Yokogawa EJA 510A absolute pressure transmitter / 530A pressure transmitter Yokogawa EJA510A Absolute pressure transmitter and yokogawa EJA530A pressure transmitter is used to measure the pressure of gas, liquid and steam, then transform it into a 4-20

Description

1、The features

　　Yokogawa EJA 510A absolute pressure transmitter / 530A pressure transmitter Yokogawa EJA510A Absolute pressure transmitter and yokogawa EJA530A pressure transmitter is used to measure the pressure of gas, liquid and steam, then transform it into a 4-20 madc current signal output. Yokogawa EJA510A pressure transmitter and pressure transmitter yokogawa EJA530A can also through the BRAIN hand operator or CENTUM CS/muXL or rosemount HART 475 hand operator to communicate with each other, through them to set and monitor, etc.

2、Technical specifications

		EJA510A / EJA530AAbsolute and Gauge Pressure Transmitters
		A capsule	B capsule	C capsule	D capsule
Measurement span		0~200kPa (0~29psi)	0~2MPa (0~290psi)	0~10MPa (0~1450psi)	0~50MPa (0~7200psi)
Measurement range		10~200kPa (1.45~29psi)	0.1~2MPa (14.5~290psi)	0.5~10MPa (72.5~1450psi)	5~50MPa (720~7200psi)
Accuracy		±0.2%	±0.2%	±0.2%	±0.2%
Level of Protection		IP67，NEMA 4X，JIS C0920 The immersion type
explosion-proof		FM，CENELEC ATEX，CSA，IECEx
Output Signal		4~20mA DC or FOUNDATION™ fieldbus PROFIBUS PA two wire system of digital communication
Power		BRAI and HART:10.5~42V DC (intrinsic safety type: 10.5~30V DC) Fieldbus:9~32V DC (intrinsic safety typeEntitym model9~24V DC，intrinsic safety typeFISCO model9~17.5V DC)
Environment Temperature		-40~85℃(-40~185℉) (normal) -30~80℃(-22~176℉) (Integral indicator)
Process Temperature		-40~120℃(-40~248℉) (Normal)
The maximum pressure		4.5MPa (645psig)	The maximum pressure	4.5MPa (645psig)	The maximum pressure
Installation		2-inch Pipe installation
Wetted parts materials	diaphragm capsule	Wetted parts materials
	Cover flange
Shell		Aluminum alloy or SUS316 stainless steel (optional)

3、Product selection list:

　　Basic specification code： EJA510A-DAS4N-02NN

　　EJA510A---- Absolute pressure transmitter

　　EJA530A---- Gauge pressure transmitter

Output Signal

-D	4 to 20 mA DC with digital communication (BRAIN protocol)
-E	4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)

-F

Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C22T02-00E)

-G

Digital communication (PROFIBUS PA protocol, refer to GS 01C22T03-00E)

Measurement span

(capsule)

A	10 to 200 kPa {0.1 to 2 kgf/cm2} {1.45 to 29 psi} {0.1 to 2 bar}
B	0.1 to 2 MPa {1 to 20 kgf/cm2} {14.5 to 290 psi} {1 to 20 bar}
C	0.5 to 10 MPa {5 to 100 kgf/cm2} {72.5 to 1450 psi} {5 to 100 bar}
D	5 to 50 MPa {50 to 500 kgf/cm2} {720 to 7200 psi} {50 to 500 bar}

Wetted parts

material *2

S#	SUS316L 4 Hastelloy C-276 3
H#	Hastelloy C-276 3 Hastelloy C-276 3

Process connection

4	1/2 NPT female
7	1/2 NPT male
8	G 1/2 DIN 16 288 male
9	M20 1.5 DIN 16 288 male

-

N

Always N

-

-0

Always 0

Electrical connection

0	G1/2 female, one electrical connection
☆2	1/2 NPT female, two electrical connections without blind plug
3	Pg 13.5 female, two electrical connections without blind plug
4	M20 female, two electrical connections without blind plug
5	G1/2 female, two electrical connections and a blind plug
7	1/2 NPT female, two electrical connections and a blind plug
8	Pg 13.5 female, two electrical connections and a blind plug
9	M20 female, two electrical connections and a blind plug

A

G1/2 female, two electrical connections and a SUS316 blind plug

C

1/2 NPT female, two electrical connections and a SUS316 blind plug

D

M20 female, two electrical connections and a SUS316 blind plug

Integral indicator

D	Digital indicator
E	Digital indicator with the range setting switch *1
☆N	(None)

Mounting bracket

E	SECC Carbon steel 2-inch pipe mounting
F	SUS304 2-inch pipe mounting
☆N	(None)

　　The ‘☆’ marks indicate the most typical selection for each specification. Example: EJA530A-DAS4N-02NN/

　　The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use ofSUS316 material,there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

　　1、Not applicable for Output signal code F and G.

　　2、Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personneland/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material fromthe broken diaphragm and the fill fluid can contaminate the user's process fluids.Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide,sodium hypochlorite, and high-temperature steam (150 ° C [302 ° F] or above). Contact Yokogawa for detailedinformation of the wetted parts material.

　　3、Hastelloy C-276 or ASTM N10276.

ABOUT US CONTACT ME SITE MAP

LINK: