1. measurement principle
　　TY magnetostrictive liquid level transmitter is partly designed based on megnetostrictive principle, its electronic components were made by sensitive waveguide wire, waveguide, magnet and transmit electrical signals and receive return signal. When the electron probe pulse microwave generator to produce electrical impulses along the waveguide when the wire transfer within the steel pipe, at the same time electric pulse came into being a toroidal magnetic field that perpendicular to the waveguide, and at the speed of light speed transfer along to the waveguide wire. When the pulse annular magnetic field and inspcetion magnetic field met, The forming spiral magnetic field, magnetic field vector superposition of instantaneous torque and the waveguide wire is formed on a mechanical torsional wave, The torsion wave returns to the electron probe at the speed of light speed, the pulse induction coil two ends. By measuring the electrical impulses and torsion wave induced pulse produced by the return between the time difference, we can accurately calculate the measured liquid level height. At the same time make the temperature sensor into the pole, which can continious measure the medium temperature.

2. Characteristics

　　2.1 widely provided to high temperature liquid、corrosive liquid.

　　2.2 Lever sheath maerial measured maximum distance is 6m.

　　2.3 temperature range: -40-400℃; Cable sheath maerial measured maximum distance is 20m.

　　2.4 the corrosive liquid adopted PTFE teflon, sheath maerial and float, for layered liquid can be measured the posision and level at the same time.

　　2.5 high accuracy, ±0.5mm or ±1mm

　　2.6 With high resolution and fast response.

　　2.7 a variety of data output mode selection. With HART, 4-20mA output signal, PROFIBUS PA foundation fieldbus(FF)

　　2.8 The magnet of float is adopt imported magnet, long-time working life.

　　2.9 Multiple output methods to select from.

　　2.10 with reverse polarity protection function.

　　2.11 Lightning protection, prevent radio frequency interference, easy installation, without regular calibration and maintenance.

　　2.12 The product designed and certificated according to requirements of riot. Apply to mesure petroleum、chemical、steel、 foodstuff and pharmacy.

3. Parameters 

TY series Magnetostrictive  liquid level transmitter
Magnetostrictive model	TY-A	TY-B	TY-C
Appearance
Magnetostrictive application	Liquid in the simple process condition, such as gas oil 、measurement small container level.	High temperature and pressure liquid in complex procession, such as measurement in the boiler、chemical.	With Acid alkali complex corrosive liquid, such as Liquid chlorine, sulfur acid tank level measurement, etc.
Maximum measurement range	6m	6m	6m
Accuracy	±1mm	±1mm	±1mm
Process connection	Thread 3/4"NPT，flange is above DN 50	Thread is 3/4"NPT，flange is above DN 50	Thread is 3/4"NPT，flange is above DN 50
Rod material	304S/316L stainless steel	304S/316L stainless steel	Teflon、316L +PTFE
Float material	316L stainless steel	GH3039 alloy	Teflon、316L +PTFE
Process temperature	-40℃～200℃	-40℃～400℃	-40℃～200℃
Process pressure	-0.1～6MPa	-0.1～25MPa	-0.1～4MPa
Explosive-proof grade	EXIAIICT6/IP67	EXIAIICT6/IP67	EXIAIICT6/IP67
Electrical interface	2个M20×1.5	2个M20×1.5	2个M20×1.5
Signal output	Two-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）	2-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）	2-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）

Megnetostrictive model	TY-D	TY-E	TY-F
Appearance
Magnetostrictive application	A variety of mixed liquid level measurement，such as the level of oil and water、level of measurement	Soft cable sheath maerial，liquid storage tank in a wide range measurement，such as crude oil, oil products, chemical raw materials, such as LNG storage tank level measurement	Double cavity liquid level gauge，magnetostriction+magnetic version level gauge，such as boiler, gas-liquid mixing process, chemical reaction tower level measurement
Maximum measurement range	6m	20m	6m
Accuracy	±1mm	±1mm	±1mm
Process connection	Thread is 3/4"NPT，flange is above DN 50	Thread is 3/4"NPT，flange is above DN 50	Thread is 3/4"NPT，flange is above DN 50
Rod material	304S/316L stainless steel	PTFE/ stainless steel alloy	304S/316L stainless
Float material	316L stainless	316L stainless	316L stainless
Process temperature	-40℃～200℃	-40℃～120℃	-40℃～350℃
Process pressure	-0.1～6MPa	-0.1～6MPa	-0.1～25MPa
Explosive-proof grade	EXIAIICT6/IP67	EXIAIICT6/IP67	EXIAIICT6/IP67
Electrical interface	2个M20×1.5	2个M20×1.5	2个M20×1.5
Signal output	2-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）	2-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）	2-wire system 4…20mA HART RS485 PROFIBUS PA fieldbus（FF）

TY series Magnetostrictive  liquid level transmitter						Sketch map
Item
A	Ordinary type
B	High temperature and high pressure type
C	Anti-corrosion type
D	Scope level type
E	Large span cable type
F	Double cavity type liquid level
Explosion-proof
P		Standard type （not explosion proof）
D		Explosion-proof （EExdⅡBT4）
Sheath maerial of material
S6			316L stainless steel sheath maerial
S4			304S stainless steel
TF			stainless steel +PTFE
PF			PTFE soft cable sheath maerial
Way to install
D				Top mounting
C				Side mounting
T				Bottom mounting（flanged or threaded installation）
Process temperature
H0				-40～120℃
H1				-40～200℃
H2				-40～350℃
Output signal
P1					4-20MA
P2					HART
P3					RS485
Mounting height			(_)mm
Measurement range			(_)mm
Medium density			(_)g/cm
Working pressure			(_)MPa

 TY Magnetostrictive liquid level transmitter